Military

Military

Sunday
May, 19

AR-15 Oversized Takedown Pins: Improve Your Weapon’s Durability and Ease of Use

Featured in:

AR-15 oversized takedown pins have become a popular topic of conversation among gun enthusiasts and firearm owners. The AR-15 is a versatile rifle, used for hunting, sport shooting, and even self-defense. As such, it's important to keep the weapon in top condition so that it can perform at its best when needed.

Oversized takedown pins are one way to enhance the functionality of your AR-15 rifle. They're designed with larger diameters than traditional pins which allow for more secure installation as well as easier disassembly. This means that you can swap out parts or clean your rifle without compromising its accuracy and stability.

If you're someone who values precision and reliability in their firearms, then learning about AR-15 oversized takedown pins is essential knowledge to have under your belt. In this article, we'll delve deeper into what these components are all about, how they work within an AR-15 system—and some additional benefits they offer beyond just easy assembly/disassembly procedures.
Read on to discover everything there is to know about AR-15 oversized takedown pins!

AR-15 Oversized Takedown Pins: The Ultimate Upgrade for Your Rifle

Introduction

For any gun enthusiast, upgrading their firearm is a must. And if you own an AR-15 rifle, then the most recent upgrade you should be looking into are oversized takedown pins. These simple yet effective add-ons can significantly improve the functionality and overall performance of your rifle.

In this article, we will explore what oversized takedown pins are and how they work. We will also discuss their benefits over standard takedown pins, compare different brands available on the market and provide some tips on how to install them.

What Are Oversized Takedown Pins?

Takedown pins hold together the upper receiver and lower receiver of an AR-15 rifle. Standard sized takedown pins have a diameter of 0.25 inches or 1/4 inch while oversized ones have diameters from 0.28 inches to 0.31 inches.
Oversized takedown pins are larger in diameter than standard ones which makes it easier to disassemble your weapon.

These extra-wide gaps make it simpler for users who may struggle with dexterity issues or those who wear gloves during operation time; they allow quicker access when stripping down firearms without fumbling with tiny components that sometimes require tools other than fingers!

Benefits Of Oversized Takedown Pins

Improved Functionality

The primary benefit of using an oversized pin is improved functionality when taking apart your gun for cleaning or maintenance purposes.
You'll never have to worry about losing small parts again because these large-sized components cannot fall out as easily as smaller ones do! This means less time spent searching around on floors or tables trying desperately not lose critical pieces necessary get up close with all aspects inside every crevice possible – even if none were visible at first glance!

Easier Assembly

When reassembling your firearm after cleaning/maintenance procedures such as replacing springs etc., these larger pins make it easier to reinsert the upper and lower receiver back onto the firearm. This allows for quicker reassembly times which is especially useful in critical situations.

Better Accuracy

Another benefit of using oversized takedown pins is improved accuracy when firing your rifle. An oversized pin will reduce wobble between your upper and lower receivers creating a more stable platform that can eventually lead to better groupings or tighter shot patterns downrange.

Comparing Different Brands

When considering purchasing an oversized takedown pin, you may come across various brands available on the market. Here are some of our top picks:

Brand Features
KNS Precision Made from stainless steel, retains factory weight, easy installation
Strike Industries Available in seven different colors including black, red and blue; made from aluminum for lightweight design
V Seven Weapon Systems Made from Grade 5 Titanium; weighs only 0.15 oz; corrosion-resistant

While all brands offer high-quality components that function perfectly on an AR-15 rifle there are differences among them.
It's up to you as a gun owner to decide which brand suits your requirements best based on factors such as price point or personal preferences like design/color options etc.

Tips On Installing Oversized Takedown Pins

Installing these pins is relatively simple if performed correctly; here are some tips:

  • Always ensure that you have cleared out any live ammunition before beginning work
  • Use proper tools such as pliers or screwdrivers when taking apart/reassembling.
  • Follow instructions provided by manufacturer closely
  • Ensure not too much pressure used during installation process – this could damage other parts of rifle!

Conclusion

Oversized takedown pins might seem like small upgrades but they can significantly improve performance aspects while also providing additional benefits over standard-sized ones.
In conclusion, we recommend investing in one if not already owned – just make sure it fits well with your specific rifle model/brand before purchasing.

FAQs

What are AR-15 oversized takedown pins?

AR-15 oversized takedown pins are an aftermarket modification that aims to improve the functionality of the standard AR-15 rifle. These components replace the original front and rear takedown pins with larger ones, which provide a more secure fit between the upper and lower receivers. The increased size of these pins reduces wobbling or rattling between these two parts, leading to better accuracy and reliability.

The installation process for AR-15 oversized takedown pins is relatively simple, requiring only a few tools such as a punch set or hammer. However, it’s important to note that not all rifles can accommodate this type of upgrade without additional modifications.

Additionally, while there are many benefits associated with using oversized takedown pins on an AR-15 rifle; one potential drawback is that they may be incompatible with certain accessories. For example, some scopes or optics may interfere with the larger pin's placement on certain weapons platforms.

How do I install an AR 15 Oversized Takedown Pin?

Installing an AR 15 Oversized Takedown Pin requires some basic knowledge of your firearm's internals and access to appropriate tools like punches (or screws if you have side plates). First off start by removing your existing retaining pin(s) from both sides (both front & back) making sure not to lose them in case you ever want/need them again later down thee line! Once removed take out any detents/springs/etc.. then slide in your new Oversized TDPs into place where you just removed those old ones previously mentioned above!

Depending on what type/model weapon system you have there will be different methods used when installing depending upon whether it has side plates or not – so make sure read instructions carefully before starting any work!

What benefits does upgrading my ar 14 rifle with oversize take-down-pins offer me?

Upgrading your ar 14 rifle with oversize takedown pins offers several benefits. Firstly, it improves the overall stability of your rifle since the larger size of these pins creates a tighter fit between the upper and lower receivers, which reduces wobbling and rattling. This improved stability translates to better accuracy and reliability when shooting.

In addition to this, oversized takedown pins make it easier and quicker to separate the upper receiver from the lower receiver during field stripping or maintenance. The increased size provides more surface area to grip onto, making it easier for shooters with larger hands or those wearing gloves.

Finally, some shooting enthusiasts enjoy using oversized takedown pins because they enhance their firearm's aesthetics by adding an aftermarket upgrade that stands out from others in their collection.

Are there any downsides associated with installing ar-15 oversized takedown pins?

While upgrading your AR-15 rifle with oversized takedown-pins is usually beneficial for most shooters; There are still potential drawbacks that you should be aware of before getting started.

For instance; if you install them improperly (or on guns not designed for them), they may interfere with certain accessories such as scopes/optics mounted too close together like we mentioned earlier in this article which could lead not only poor accuracy but also damage either accessory if one were installed at time upgrade was done!

Additionally another downside could come from modifying rifles where manufacturers warranties are null/void upon modification(s) being performed without prior authorization per different manufacturer policy!

What materials can ar-15 oversize take-down-pins be made out of?

AR-15 Oversized Take-Down-Pins can be made out variety of materials depending on what manufacture specs call for! Some common options include steel alloys such as 1045 carbon steel or stainless steels like 303/304 grade ones too!. Additionally Titanium products have been known excellent substitutes when extra strength/lightweightness required over other metals used previously mentioned above!

The material chosen will impact the quality and durability of the takedown pins, as well as their weight and compatibility with various accessories. It’s critical to research different manufacturers' products before choosing one that meets your specific needs, whether it be for strength, aesthetics or functionality.

Latest articles

Related articles

Get the Best Deals on AR-15s at AR 15...

Are you looking for the best deals on AR 15 rifles and accessories? Look no further than...

AR 15 Laser Scope Combo: Enhancing Your Accuracy and...

The AR 15 Laser Scope Combo is a popular accessory among gun enthusiasts. It combines the power...

AR 15 Folding Stock Magpul: Ultimate Guide and Review

The AR 15 folding stock Magpul is a popular accessory for many gun enthusiasts and professionals alike....

US Army Colonel Eagle: The Elite Warrior of America’s...

US Army Colonel Eagle, a combination of two distinct symbols that represent power and courage. The eagle,...

FSAAP AR 15: The Ultimate Guide to this Powerful...

FSAAP AR 15 - if you're a gun enthusiast or someone interested in firearms, you may have...

US Air Force Tattoos: The Ultimate Guide for Enthusiasts

US Air Force Tattoos - a popular topic among military enthusiasts and ink lovers. These tattoos represent...