May, 19

Bad Lever AR-15: The Ultimate Guide for Troubleshooting and Solutions

Featured in:

The Bad Lever AR-15 is a term that resonates with every avid gun enthusiast. It's one of those controversial topics that stir up debates and arguments in shooting ranges across the country. The Bad Lever, also known as the bolt catch extension lever, has become increasingly popular among AR-15 owners due to its ability to manipulate the weapon's bolt catch more efficiently.

However, there are different schools of thought when it comes to using the Bad Lever on an AR-15 rifle. Some believe it enhances their shooting experience by allowing them faster reloads and improved weapon handling while others feel that it compromises safety protocols set for firearms usage. In this article, we will take a closer look at what exactly is a Bad Lever for an AR-15 rifle and explore both sides of the argument so you can make an informed decision on whether or not you should get one for your own firearm.

So sit back, relax and read on as we delve deeper into this contentious topic surrounding one of America's most beloved rifles – The AR-15 – And its ever-popular accessory: The Bad lever!

Bad Lever AR-15: A Comprehensive Guide

If you're a gun enthusiast, you know that the AR-15 is one of the most popular rifles in America. It's highly customizable and can be configured to suit different purposes such as home defense, hunting, or target shooting. However, with all these customization options comes a risk of making modifications that could negatively affect your rifle's performance. One modification that has been gaining popularity recently is the Bad Lever for AR-15s.

What is a Bad Lever?

A Bad Lever is an aftermarket part designed to make it easier and faster to manipulate your rifle's bolt catch/release mechanism. The standard bolt catch on an AR-15 requires two hands: one hand holds onto the foregrip while the other manually activates the bolt release latch located above and behind it.

The bad lever replaces this manual operation by adding an extension arm on both sides of your rifle that allows you to use your trigger finger or support hand thumb instead of using two hands.

Benefits Of Using A Bad Lever

By using this simple add-on device for just $25 – $35 USD depending on where you purchase from; there are many benefits which include:

Quicker Reload Times

With a bad lever installed in place of traditional bolt catches/ releases; shooters can quickly reload their magazines without taking their eyes off targets down-range or losing their grip positions—saving precious seconds during competitions where every second counts.

Efficient Manipulation with One Hand

You won't have to put down what might already be heavy equipment just so as not cause any accidental discharge due towards mishandling causes! With its unique design allowing for efficient manipulation even when wearing gloves makes it easy-to-use while also enabling improved control over reloading sequences possible using only one hand!

Better Control Over Rifle Mechanics

Using this revolutionary upgrade will also give shooters better control over essential mechanics within weapons systems like timing adjustments which improve accuracy by reducing wear-and-tear on firing mechanisms.

Potential Downsides Of Using A Bad Lever

While the bad lever offers numerous benefits, there are also some potential downsides to consider:

Increased Chance of Accidental Discharge

One major concern that some gun owners have with using a bad lever is the increased chance for unintentional discharge. Since this part extends out from your rifle, it may be more prone to being accidentally bumped or snagged when moving around with your firearm in crowded spaces.

Compatibility Issues

The second downside is compatibility. Not all AR-15 models are compatible with Bad Levers due to different types of receivers and bolt catch/release systems used among various manufacturers. It's essential that you check if your rifle model can accommodate this upgrade before making any purchases.

How To Install A Bad Lever?

Installing a bad lever isn't rocket science, but it does require some basic tools and mechanical know-how. Here's how you can do it yourself:

  1. Remove the magazine from your rifle.
  2. Unload any chambered rounds
  3. Separate the upper and lower receiver halves
  4. Remove the retaining pin on either side of existing bolt catch latch
  5. Install both arms end-to-end onto pins located at each side without interference during closeup operation!
  6. Insert new release mechanism into location where original was positioned.
  7. Reassemble all parts together correctly!

If you're not comfortable installing parts yourself or don’t have necessary equipment/tools then seek help from professionals who specialize in gunsmithing work!


In conclusion, installing a bad lever onto an AR-15 has its pros and cons; however, as long as proper safety measures are taken into consideration before installation – such as verifying compatibility between rifles & after-market modifications plus familiarizing oneself with mechanics behind weapon systems – there should be no issues during use!

This simple modification provides many benefits like quick reload times, efficient manipulation with one hand and better control over rifle mechanics. Overall it’s a great way of improving your shooting experience while also increasing accuracy without breaking the bank!


What is a Bad Lever AR-15 and how does it work?

A Bad Lever AR-15 is an extension lever that attaches to the bolt catch on an AR-15 rifle. It allows the shooter to release or lock the bolt back with their trigger finger, without having to take their hand off of the grip. This can save valuable seconds in tactical situations and make for smoother operation overall.

The Bad Lever is installed by removing the existing bolt catch roll pin and replacing it with one of two supplied pins, depending on whether you have an ambidextrous or standard lower receiver. The lever itself then attaches to the new pin via a screw and hex key included in its packaging.

To use it, simply pull back on your charging handle as normal until your bolt locks back into place. Then press down on your new extended lever with your trigger finger while simultaneously releasing pressure from your charging handle – this will cause your bolt to release forward quickly and smoothly.

What are some benefits of using a Bad Lever AR-15?

Using a Bad Lever provides several advantages over traditional methods of operating an AR-15:

  1. Fast Reloads: Since you don't need to take time fumbling around underneath or behind the rifle for controls, reload times can be significantly reduced when using this accessory.
  2. One-handed Operation: With this modification attached, users can keep their firing hand grip without needing both hands available.
  3. Easy Lock-backs: If you want to perform maintenance procedures like cleaning or inspection after shooting sessions at range; pulling rearwards will become effortless thanks again due its larger surface area compared other levers that come stock from factory!

Additionally, many shooters find that they are more accurate when using a bad lever because they are able maintain better control over their firearm throughout various stages of reloading.

Can I install my own Bad Lever onto my AR-15 rifle?

Yes! Installing a bad lever onto your AR-15 is a fairly simple process that can be done with a few basic tools. The two most important things you need to do this are the correct roll pin, and an allen wrench or hex key.

Here's how it's done:

  1. Remove Your Bolt Catch: Before installing any aftermarket parts onto your rifle, make sure that it is unloaded and cleared of all ammunition. Then remove the roll pin from your bolt catch by using a punch and hammer.
  2. Replace Roll Pin: Install the new roll pin included in your Bad Lever kit onto the hole where you just removed your old one.
  3. Attach Bad Lever: Once you have secured the new roll pin into place, attach your new bad lever using an allen wrench or hex key provided with instructions.
  4. Test Fire & Troubleshoot Any Issues: Finally, test fire at range while carefully monitoring its functionality to ensure everything works as expected. If there are any issues encountered during use such as malfunctions when cycling rounds through gun; refer back instruction manual for troubleshooting advice.

Will adding a Bad Lever AR-15 void my warranty?

Adding accessories like bad levers should not void warranties on rifles when installed properly within manufacturer guidelines. However, always check with manufacturer before making changes just in case they have specific policies regarding aftermarket modifications added which could affect their warranty coverage.

Additionally if adding accessory causes damage due improper installation or faulty materials used during manufacturing process then these reasons may not be covered under standard warranties.

What kinds of shooters benefit most from using a Bad Lever AR-15?

Shooters who frequently compete in timed competitions will find great use out of this accessory because it allows them to shave off valuable seconds while reloading their firearms quickly without sacrificing accuracy.

Tactical shooters also benefit from having fast access controls on their firearms since they often must react quickly under high-pressure situations that require them act faster than traditional methods allow for.

In conclusion,
If you are looking to increase the speed and efficiency of your AR-15 rifle, a Bad Lever is definitely worth considering. It provides an easier way to lock back the bolt and release it quickly without having to take your hand off the grip. This can save valuable seconds in tactical situations and make for smoother operation overall. Additionally, installing one yourself is fairly easy if you have some basic tools on hand – just be sure that doing so won't void any warranties that may be in place on your firearm before getting started!

Latest articles

Related articles

Top 10 Best AR-15 Parts to Upgrade Your Rifle:...

When it comes to building an AR-15, selecting the right parts can make all the difference. Every...

AR 15 Liquor Bottle: The Ultimate Combination for Gun...

The AR 15 liquor bottle has become a popular item among gun enthusiasts and collectors alike. This...

AR 15 FDE Stock: A Comprehensive Guide to Choosing...

The AR 15 FDE stock is a popular accessory among firearm enthusiasts and professionals alike. The FDE...

US Marine Corps SVG: Show Your Support with Military-Inspired...

US Marine Corps SVG is a term that refers to a specific type of digital file format...

Pre Ban AR-15 Magazines: How to Identify Them Easily

Are you a gun enthusiast or collector who is interested in finding pre-ban AR-15 magazines? If so,...

Goat Guns AR 15: The Ultimate Miniature Replica Firearms...

Goat Guns AR 15 is a term that might sound unfamiliar to some, while others may have...