Military

Military

Saturday
June, 15

Clean AR 15: How to Properly Maintain and Improve Your Rifle’s Performance

Featured in:

Clean AR 15 is an essential part of firearm maintenance, and it is crucial to keep your rifle in top-notch condition. The AR platform has become one of the most popular rifles for both military personnel and private citizens alike. However, even with proper care and maintenance, debris from shooting can accumulate over time, causing malfunctions or even damage to your gun.

A clean AR 15 will not only ensure that your firearm operates correctly but also helps extend its lifespan. Failing to maintain a clean rifle can lead to a host of problems such as misfires or jams that could affect accuracy when you need it most. In this article, we will explore everything there is to know about how to clean an AR 15 thoroughly and efficiently so that you get the best performance from your gun every time you use it.

Read on for our comprehensive guide on how-to's for cleaning an AR 15 properly so that you can take good care of this valuable tool in your arsenal!

Clean AR 15: Tips and Benefits

If you are a gun enthusiast, then it's likely that you own an AR-15. The AR-15 is one of the most popular rifles on the market today. It's versatile, reliable, and easy to customize. But like any other firearm, it requires regular cleaning to maintain its performance.

In this article, we'll discuss how to clean your AR-15 and some of the benefits that come with proper maintenance.

Why Clean Your AR-15?

Cleaning your rifle regularly is essential for several reasons:

  1. Reliability: Cleaning removes dirt and debris from your gun which can prevent malfunctions caused by fouling.
  2. Accuracy: Dirty barrels can impact accuracy as they affect bullet trajectory.
  3. Safety: A dirty firearm has a higher chance of misfiring or even exploding in extreme cases.

Best Practices for Cleaning Your Rifle

Here are some tips to keep in mind when cleaning your rifle:

Disassembling Your Rifle

Before cleaning any firearm make sure it’s unloaded! Also if possible ensure there isn't any ammunition nearby as a safety precaution!

Firstly disassemble all major parts from each other so you have access to even hard-to-reach areas.

ARs have many parts such as:

  • Lower Receiver
  • Upper Receiver
  • Bolt Carrier Group (BCG)
  • Charging Handle

Remove these carefully using manufacturer instructions if available or seek advice from experts before starting work.

Cleaning Solvents & Lubricants

Once disassembled use an appropriate solvent specific for firearms like hoppes no9 etc depending on preference followed up by lubricant oil applied sparingly!

Saturating certain metals such as aluminum with soak-in chemicals may damage them beyond repair so always opt-in for safer options before proceeding forward.

Brushing Process

The majority of carbon buildup in ar 15s occur in the barrel. To begin cleaning, apply solvent into the bore, and let it sit for a few minutes to break down any debris.

Use a brass or nylon brush to scrub away any build-up inside of the barrel. Ensure that you’re moving from breach towards muzzle when brushing your rifle!

Cleaning The Bolt Carrier Group

The bolt carrier group is one of the most critical parts of an AR-15. It's responsible for loading and ejecting rounds from your rifle, which means that it gets dirty pretty quickly.

To clean this part use lubricant on key areas such as extractor spring pins and cam pin etc before reassembling these back with care.

Conclusion

In conclusion, keeping your AR-15 clean is vital not only for safety but also for performance reasons.

By following these tips discussed above you can have peace-of-mind knowing that each time you shoot, your firearm will be working at its best potential!

FAQs

What is a clean AR 15 and why is it important to maintain it?

A clean AR-15 is a weapon that has been disassembled, thoroughly cleaned, inspected for damage or wear, lubricated and reassembled. Maintaining your weapon in good condition will ensure optimal performance when you need it most. A dirty gun can result in misfires or even jamming which could be life-threatening in critical situations.

Cleaning an AR-15 should become part of your regular maintenance routine as neglecting this procedure can cause dirt and residue buildup within the barrel leading to corrosion causing permanent damage over time. Proper cleaning will extend the lifespan of your firearm while maintaining its accuracy.

To properly maintain an AR-15 after shooting may require additional cleaning attention depending on usage conditions such as weather elements, exposure to dirt/mud/dust while at shooting range/hunting grounds – each adding unique challenges that require specific cleaning techniques.

How often should I clean my AR 15?

The frequency with which you clean your firearm depends on how much you use it. If you shoot frequently then we recommend giving attention every time after firing; but if not used regularly then we suggest once every six months for inspection and thorough cleansing if necessary.

It's always better to err towards vigilant cleanliness because long-term storage without proper care can lead to rust forming inside essential components like bolt carrier groups causing malfunctions during use; especially since oxidation increases when metal parts are exposed repeatedly without being wiped down afterwards – making them more susceptible over time than other materials such as polymer frames found on handguns etc..

What equipment do I need for cleaning my rifle?

You'll need a few basic tools including solvent/cleaner agent (to break down carbon buildup), bore brush (for scrubbing out any fouling within the barrel) patch holder/jags along with cotton patches (used moistened with solvent/cleaner agent) pushrod/brush handle combo tool kit for removing carbon buildup, and lubricant oil.

A cleaning mat or designated workspace is also recommended to protect your firearm from scratches while cleaning. Make sure you have a well-ventilated area as solvent fumes can be harmful if inhaled over time.

Can I use any cleaner on my AR 15?

No, it's recommended that you only use cleaners specifically designed for firearms. Gun powder residue can cause corrosion and damage components of the gun if not dissolved by the proper solvent/cleaner agent; using non-purpose cleaners may harm your rifle's surface finishes too! Different firearms require specific solvents that are appropriate for each type of metal components/materials including brass-cased rounds vs steel-cased rounds – so always follow manufacturer's instructions when selecting products..

What do I need to know when taking apart my AR 15?

Before disassembling an AR-15 firearm make sure it’s safe by checking there is no ammunition in the chamber or magazine before proceeding; We recommend watching instructional videos online or reading owner's manual beforehand so you're familiar with how everything works together/others who may own similar models etc..

Each component must be examined carefully because each piece has unique assembly points within its respective groupings (upper/lower receiver assemblies) requiring certain tools depending on size/shape differences between different brands/models available today. Be gentle with small parts such as springs during disassembly/reassembly process which could cause them bend/break under pressure – handle all of them cautiously!

Latest articles

Related articles

AR 15 Buffer Springs: Uncovering the Best Options for...

Welcome to this article about the Best AR 15 Buffer Spring. If you are a gun enthusiast,...

Wooden Stock AR-15: The Classic Look for Your Modern...

Wooden stock AR 15. These four words might not mean much to the uninitiated, but for anyone...

US Marine Corps Shirts: Show Your Support with the...

US Marine Corps shirts are a popular item among military enthusiasts and civilians alike. These shirts are...

US Army MSV: The Ultimate Military Support Vehicle

The US Army MSV - a term that might sound unfamiliar to many people outside the military...

AR-15 Detent Spring: A Guide to Installation and Functionality

If you're a seasoned AR-15 owner, you're no stranger to the importance of every component in this...

US Air Force: Aim High and Soar Above the...

US Air Force Aim High. These four words hold a significant meaning for both the men and...