July, 18

Remove AR 15 Handguard: A Step-by-Step Guide for Easy Disassembly

Featured in:

If you are a gun enthusiast, then you probably know what an AR-15 is. This rifle has become increasingly popular in recent years due to its versatility, accuracy and ease of use. But for all its benefits, there comes a time when the user needs to remove the handguard for cleaning or maintenance purposes.

Removing the AR-15 handguard might sound like a simple task, but it can be daunting if you have never done it before. With so many different models of AR-15s on the market today with varying designs and modifications, figuring out how to safely remove your specific model's handguard can be tricky. In this article we will guide you through everything that you need to know about removing an AR 15 handguard – from choosing the right tools and techniques for removal without damaging your firearm’s body or barrel while ensuring safety at every step.

Read on as we dive deep into this topic!

Remove AR 15 Handguard: A Comprehensive Guide

The AR 15 is one of the most popular rifles in the world today. It’s versatile, reliable, and customizable – which is why so many firearm enthusiasts own one. If you’re looking to upgrade or replace parts on your AR 15, it’s important to know how to remove and install them properly. In this guide, we’ll be focusing on how to remove the handguard from your AR-15.

How To Remove The Handguard From Your AR-15

Removing an AR-15 handguard can be a bit intimidating at first glance but with proper instruction, it's relatively simple.

Step One: Unload And Disassemble Your Rifle

Before you begin any maintenance or modification work on your firearm ensure that it is unloaded and that all ammunition has been removed from the surrounding area.

After this step disassemble your rifle according to manufacturer specifications including removing any accessories such as optics or lasers after tagging for correct alignment upon reassembly.

Step Two: Identify The Type Of Hand Guard Installed On Your Rifle

There are two primary types of handguards available for an ar-15 rifle – drop-in style handguards and free-floating-style 2-piece designs.

Drop-in style refers to those where individual sections fit together around both sides of barrel nut while floating styles require removal only at front-end without loosening any attachments along receiver end holding onto top portion individually secured by separate locking system (typically screws).

Step Three: Removing Drop-In Style Hand Guards On An Ar-1520

If you have a drop-in style ar-1520 then follow these steps:

  1. Use Allen wrench provided with kit/tool/utility.
  2. Loosen screws located on bottom portion attached directly under barrel nut.
  3. Unscrew corresponding catch plate from both left/right side rail sections horizontally extending forward away from upper receiver towards muzzle end until clear enough space has been created allowing for front end sight post removal if applicable.

Step Four: Removing Free-Floating Style 2-Piece Hand Guards On An Ar-1520

If you have a free-floating style handguard on your ar-1520 then follow these steps:

  1. Use Allen wrench provided with kit/tool/utility.
  2. Loosen screws at front-end of rail attached to upper receiver assembly, but not loosening any attachments along receiver end holding onto top portion individually secured by separate locking system (typically screws).
  3. Slide off rear clamp bracket from bottom side so that it can be removed easily later when disassembling rifle's barrel nut/receiver assembly during reassembly process..


Removing the handguard from your AR 15 is an important skill to learn as a firearm enthusiast. By following these simple steps, you’ll be able to remove the handguard safely and easily without damaging any parts of your rifle or accessories.

Remember always ensure that firearm is unloaded before starting work on it and be sure to only use proper tools designed for firearms maintenance tasks in order not risk damage either yourself or weapon being worked upon.

Now that you know how to remove the handguard, enjoy customizing your AR-15!


What is an AR 15 handguard and why would someone want to remove it?

An AR 15 handguard refers to the piece of equipment that surrounds the barrel of an AR 15 rifle. The purpose of a handguard is to protect your hands from heat generated by prolonged use or direct contact with the hot barrel.

There are many reasons why you might wish to remove your AR 15's handguard. For example, if you need to install any accessories such as bipods, flashlights, lasers or other attachments onto your rifle's rails system then removing the hand guard would be necessary in order for these items to be installed successfully.

Another reason why someone may want their ar-15 removed could be if it has been damaged due to extensive use over time and needs replacement. This can occur due regular wear and tear on parts that experience high levels of stress or pressure during firing cycles.

In order for you replace a damaged part in your gun effectively, you will have first had removed its surrounding components including but not limited too: buttstock assembly kit (to separate upper and Lower receiver), buffer tube assembly kit (to access gas system parts) etc.

How do I go about removing my ar-15’s Handguards?

Removing an Ar-15's Handguards isn't always straightforward as there are multiple types depending on brand models available in market.Thus specific knowledge regarding each model/brand should be conducted before attempting disassembly

To start with this process make sure that safety guidelines have been followed thoroughly prior handling firearms:

  1. Unload firearm completely
  2. Point muzzle away from body at all times
  3. Keep finger off trigger until ready shoot

Step-by-step instructions for how one can remove their ar-5’s Handguards include:

1.Disassemble upper receiver by separating both halves using push pins located at rear end behind buffer tube area.
2.Remove bolt carrier group & charging handle gently without applying excessive force.
3.Locate the delta ring, which is used to secure the handguard in place. It can be found at the base of your rifle near its barrel nut.
4.You will need a Delta Ring wrench or pliers to on twist it counter clockwise direction and slide it towards rear end while releasing spring tension with other hand.

Once you have removed Delta Ring using appropriate tools, you can proceed to removing Handguards by sliding them out from front end.

What are some of the challenges faced when attempting to remove an AR 15 Handguard?

Removing an AR 15 Handguard sounds straightforward however there are many factors that could make process challenging. The first factor concerns compatibility issues between handguards and their respective rifles. Certain models may require specific toolkits for removal or even modification before they can fit securely onto different guns.

The second challenge comes in disassembling upper receiver itself for accessing internal parts such as bolt carrier group & charging handle etc.. This requires thorough knowledge about firearm maintenance procedures which may not be familiar too everyone .

Lastly one needs to pay attention towards muzzle direction throughout process so as not point weapon at anyone including themselves.

Is there any equipment needed specifically for removing an Ar-15’s Handguards?

To remove ar-15's hand-guard safely and efficiently certain equipments should be present prior starting work.

Delta ring wrench/pliers: One requires delta-ring tools since its design fitted uniquely on each model this creates problem if incorrect size/tool is used resulting breakage

Gloves: Ensure gloves made up heavy-duty material cover hands completely during removal prevent slipping or dropping gun parts by having firm grip

Safety glasses/Goggles : These protect eyes from small metal debris that might produce during disassembly

Rags/cleaning supplies : Keep area clean free dust/dirt ensures maximum grip over firearms components

Can I reassemble my ar-15 once I've successfully removed its Handguards?

Yes, it is possible to reassemble your ar-15 once you have removed its handguards. The process for reassembly will be the reverse of the steps taken during removal.

Make sure to follow safety protocol thoroughly as mentioned above while putting together components in their right position.

After inserting Handguards back into place using appropriate tools (if needed), continue sliding delta-ring towards front end and twist it clockwise direction until its securely placed over barrel nut.

Lastly one should ensure all pins are secure and tightened properly before testing weapon functionality or firing cycle in order maintain maximum efficiency & performance of firearm after disassembly/reassembly process has been completed successfully.

Latest articles

Related articles

AR 15 Buffer Springs: Uncovering the Best Options for...

Welcome to this article about the Best AR 15 Buffer Spring. If you are a gun enthusiast,...

Wooden Stock AR-15: The Classic Look for Your Modern...

Wooden stock AR 15. These four words might not mean much to the uninitiated, but for anyone...

US Marine Corps Shirts: Show Your Support with the...

US Marine Corps shirts are a popular item among military enthusiasts and civilians alike. These shirts are...

US Army MSV: The Ultimate Military Support Vehicle

The US Army MSV - a term that might sound unfamiliar to many people outside the military...

AR-15 Detent Spring: A Guide to Installation and Functionality

If you're a seasoned AR-15 owner, you're no stranger to the importance of every component in this...

US Air Force: Aim High and Soar Above the...

US Air Force Aim High. These four words hold a significant meaning for both the men and...