July, 16

Troubleshooting AR 15 Jams: Tips and Tricks for Smooth Firing

Featured in:

AR 15 Jams – two words that are enough to make any gun enthusiast cringe. Whether you're an experienced shooter or a beginner, encountering a jam can be frustrating. Even the most reliable firearms can have occasional issues with jams, and the AR 15 is no exception.

As one of the most popular rifles in America, it's likely that many gun owners have had some experience with an AR 15 jamming at some point. In fact, due to its design and versatility for customization, jams may even occur more frequently than other rifles on the market.

But fear not! With proper maintenance and troubleshooting techniques, you can reduce your chances of experiencing a jam with your AR 15 rifle. In this article we will explore common causes for jams in AR 15s as well as how to fix them when they do occur. So grab your cleaning kit and let's dive into all things related to preventing those annoying malfunctions from happening when it matters most!

AR 15 Jams: Causes, Solutions, and Prevention

If you're a gun enthusiast or someone who owns an AR-15 rifle, you've probably experienced jams while shooting at some point. A jam is when the bullet doesn't get ejected properly from the chamber or fails to feed into the barrel correctly. Jams are frustrating and can ruin your shooting experience.

In this article, we'll discuss everything about AR-15 jams – what causes them, how to solve them if they do occur and how to prevent future ones.

What Causes AR-15 Jams?

AR-15 rifles are known for their reliability and durability. However, they still have potential jamming issues which could be caused by any of these factors:

Dirty Gun

A dirty gun is one of the major reasons why your rifle might start jamming frequently. Dirt buildup in various parts of your firearm can lead to malfunctioning during firing.

Magazine Issues

Magazine problems such as worn out springs or improper loading may cause feeding problems leading up to a misfire.

Poor Ammunition Quality

Using low-quality ammunition could result in failures that include stovepipes (when spent casings get stuck vertically), double feeds (when two rounds try entering into the barrel at once), among other malfunctions that affect functionality when firing up your weapon.

Solving Common Jam Problems with Your Rifle

The key solution towards solving common issues would depend on where it stems from.
Some tips include:

  1. Cleaning Your Weapon Regularly:
    Clean all parts consistently with proper solvents so dirt doesn't accumulate inside crucial areas like chambers which might lead up towards ejection failure.

  2. Checking Magazines And Load Properly
    Ensure magazines aren't overfilled beyond their capacity stated by manufacturers; inspect magazine springs for signs of wear before using them regularly for extended periods.

  3. Using High-Quality Ammunition
    Avoid using low-quality ammunition to prevent jamming problems. Inexpensive ammo might be tempting, but it may lead to consistent issues with your rifle in the long run.

Preventing Future Jams

Preventing future jams is an important aspect of owning a firearm. Here are some tips for avoiding AR-15 jams:

Regular Maintenance

To keep your gun functioning optimally, perform regular maintenance and cleaning on all parts of the weapon.

Quality Magazines

Ensure that you use high-quality magazines that are built for long-term usage even under extreme conditions and heavy firing frequently.

Use High-Quality Ammunition

Using quality ammunition prevents malfunctions from occurring whilst shooting or practicing with your firearms.

In conclusion, AR-15 jams can be frustrating and dangerous if not handled properly. The best way to avoid them is by performing regular maintenance on all parts of your weapon, using high-quality ammunition and magazines while ensuring proper loading techniques when using them daily. Always remember, handling guns should be done with care; safety first every time!


What causes an AR-15 to jam?

AR-15 jams can be caused by a variety of factors. One of the most common reasons is improper maintenance or cleaning. If the gun is not cleaned regularly, dirt and debris can build up in the chamber or bolt carrier group, causing malfunctions.

Another reason for AR-15 jams could be poor quality ammunition. Low-quality ammunition may have inconsistent dimensions, which means it might not fit properly in the chamber and cause feeding problems.

The gas system also plays a significant role in preventing jams. A dirty or improperly adjusted gas system may fail to cycle properly, leading to failures to feed or eject rounds from the weapon.

Finally, user error could be another factor contributing to AR-15 jams. Improper grip on the weapon can cause short-stroking during firing cycles that result in stoppages as well.

In order to prevent these issues from happening it's important that you keep your firearm clean and maintained on a regular basis and use high-quality ammunition when possible.

How do I clear an AR-15 jam?

Clearing an AR-15 jam will depend on what type of malfunction has occurred with your firearm:

  1. Failure To Feed: This occurs when there’s not enough force pushing forward from either insufficient ammo pressure or when there’s too much drag resistance against cartridges sliding into place inside magazine wells – remove magazine forcefully while cycling charging handle back quickly (or tap forward assist if equipped).
  2. Double Feeds: This occurs when more than one round are attempting entry into barrel at once resulting in failure-to-feed – lock bolt back then drop mag before pulling out any offending ammo.
  3. Failure To Eject: Ammo extraction process stalls due primarily because casing isn't getting released fast enough after cartridge has been fired so push/pull charging handle firmly rearward before inspecting ejection port area for obstructions.
  4. Stovepipe: Resulting from spent cartridge casing not being ejected from chamber or deflects off of bolt carrier group during cycling – lock bolt back, remove magazine, and clear jammed round by tipping weapon on its side.

Once cleared it's important to carefully check the firearm before continuing use to ensure no further issues have occurred.

How do I prevent AR-15 jams?

Preventing AR-15 jams can be done through proper maintenance and care. Make sure that your gun is cleaned regularly and has been appropriately lubricated. Use high-quality ammunition so that you don't risk having rounds get stuck in the chamber or fail to feed properly.

Make adjustments if needed such as ensuring gas system is properly clean for optimal performance. You should also grip your weapon correctly with both hands when firing so that there isn't any user error causing short strokes during cycling cycles which may lead to stoppages happening more often than they should otherwise occur.

Can different ammo types cause an AR-15 jam?

Yes, different types of ammunition can contribute significantly towards ar 15 jams occurring Within a given firearm platform some cartridges simply perform better than others depending on their dimensions whether it's length width height etc

In general higher quality ammo will be more reliable but due diligence needs to remain intact because even high-quality rounds may still result in problems from time-to-time especially after extended periods of firing without cleaning or maintenance (such as when participating in competitions where rapid fire is involved).

What steps must I take before firing my AR-15 again once a jam has occurred?

Before using an ar 15 again following a jam you need first determine what type of malfunction caused issue then resolve problem itself followed by inspecting rifle for damage related directly resulting from said incident When everything looks good proceed with reassembling rifle then try several function checks while live-firing at range such as shooting groups checking various distances reliability reasons
If possible use same brand/lot number ammunition used previously prior experiencing malfunctions so that you can confirm the problem has been resolved and not simply due to poor quality or inconsistent dimensions of ammo used in first place.

Latest articles

Related articles

AR 15 Buffer Springs: Uncovering the Best Options for...

Welcome to this article about the Best AR 15 Buffer Spring. If you are a gun enthusiast,...

Wooden Stock AR-15: The Classic Look for Your Modern...

Wooden stock AR 15. These four words might not mean much to the uninitiated, but for anyone...

US Marine Corps Shirts: Show Your Support with the...

US Marine Corps shirts are a popular item among military enthusiasts and civilians alike. These shirts are...

US Army MSV: The Ultimate Military Support Vehicle

The US Army MSV - a term that might sound unfamiliar to many people outside the military...

AR-15 Detent Spring: A Guide to Installation and Functionality

If you're a seasoned AR-15 owner, you're no stranger to the importance of every component in this...

US Air Force: Aim High and Soar Above the...

US Air Force Aim High. These four words hold a significant meaning for both the men and...